Genome-inferred spatio-temporal resolution of an uncultivated Roizmanbacterium reveals its ecological preferences in groundwater

Subsurface ecosystems like groundwater harbour diverse microbial communities, including small-sized, putatively symbiotic organisms of the Candidate Phyla Radiation, yet little is known about their ecological preferences and potential microbial partners. Here, we investigated a member of the superphylum Microgenomates (Cand. Roizmanbacterium ADI133) from oligotrophic groundwater using mini-metagenomics and monitored its spatio-temporal distribution using 16S rRNA gene analyses. A Roizmanbacteria-specific quantitative PCR assay allowed us to track its abundance over the course of 1 year within eight groundwater wells along a 5.4 km hillslope transect, where Roizmanbacteria reached maximum relative abundances of 2.3%. In-depth genomic analyses suggested that Cand. Roizmanbacterium ADI133 is a lactic acid fermenter, potentially able to utilize a range of complex carbon substrates, including cellulose. We hypothesize that it attaches to host cells using a trimeric autotransporter adhesin and inhibits their cell wall biosynthesis using a toxin–antitoxin system. Network analyses based on correlating Cand. Roizmanbacterium ADI133 abundances with amplicon sequencing-derived microbial community profiles suggested one potential host organism, classified as a member of the class Thermodesulfovibrionia (Nitrospirae). By providing lactate as an electron donor Cand. Roizmanbacterium ADI133 potentially mediates the transfer of carbon to other microorganisms and thereby is an important connector in the microbial community.     

Life cycle assessment of emerging technologies at the lab scale: The case of nanowire‐based solar cells

Nanomaterials are expected to play an important role in the development of sustainable products. The use of nanomaterials in solar cells has the potential to increase their conversion efficiency. In this study, we performed a life cycle assessment (LCA) for an emerging nanowire‐based solar technology. Two lab‐scale manufacturing routes for the production of nanowire‐based solar cells have been compared—the direct growth of GaInP nanowires on silicon substrate and the growth of InP nanowires on native substrate, peel off, and transfer to silicon substrate. The analysis revealed critical raw materials and processes of the current lab‐scale manufacturing routes such as the use of trifluoromethane (CHF₃), gold, and an InP wafer and a stamp, which are used and discarded. The environmental performance of the two production routes under different scenarios has been assessed. The scenarios include the use of an alternative process to reduce the gold requirements—electroplating instead of metallization, recovery of gold, and reuse of the InP wafer and the stamp. A number of suggestions, based on the LCA results—including minimization of the use of gold and further exploration for upscaling of the electroplating process, the increase in the lifetimes of the wafer and the stamp, and the use of fluorine‐free etching materials—have been communicated to the researchers in order to improve the environmental performance of the technology. Finally, the usefulness and limitations of lab‐scale LCA as a tool to guide the sustainable development of emerging technologies are discussed.     

Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.     

A large proportion of mediastinal and perirenal visceral fat of Siberian adult people is formed by UCP1 immunoreactive multilocular and paucilocular adipocytes

Journal of Physiology and Biochemistry - Many deleterious consequences for health of excessive fat accumulation are due to visceral fat. Browning of visceral fat is mainly cold dependent and has...     

Effect of hydrophobicity degree of polymer particles on lipase immobilization and on biocatalyst performance

Abstract

Many studies describe the advantages of using hydrophobic particles on lipase immobilisation. However, many of these works neglect the effect of other variables of the supports, such as specific area and porosity, on the biocatalyst performance, and do not evaluate the influence of the hydrophobicity level of the particles on the biocatalysts’ activity as a single variable. Thus, the focus of the present work was to evaluate the effect of the hydrophobicity degree of polymeric particles on the biocatalysts’ activities, mitigating the influence of other variables. The study was divided into two steps. Firstly, distinct particles, exhibiting different composition and hydrophobicity levels, were used for the immobilization of a commercial lipase B from Candida antarctica (CAL-B). Then, distinct core-shell polymeric particles presenting different functional compounds on the surface were produced, using as comonomers styrene, divinylbenzene, 1-octene, vinylbenzoate and cardanol. Such particles were subsequently used for CAL-B immobilisation and the performance of the biocatalysts was evaluated on hydrolysis (using p-nitrophenyl laurate, as substrate) and esterification (using ethanol and oleic acid, as substrate) reactions. Based on the screening step, it was observed that for non-porous particles the correlation coefficients between the hydrophobicity level of the supports and the biocatalysts performance, for both hydrolysis and esterification reactions, were very low (0.32 and 0.45, respectively). It highlights that there was no significant correlation between these variables and that, probably, the chemical composition of the polymeric chains affects more significantly the biocatalyst performance. Then, analysing the subsequent stage, it was observed that small changes in the surface composition of the core-shell particles result in significant changes on the textural properties of the supports (specific area ranging from 1.2?m².g^?1 to 18.3?m².g^?1; and contact angles ranging from 71° (hydrophilic particles) to 92° (hydrophobic supports) when polymer films were put in contact with water). Such particles were also employed on CAL-B immobilization and it was noticed that higher correlation coefficients were achieved for hydrolysis (ρ?=?0.53) and esterification (ρ?=?0.74) reactions. Therefore, it is shown that the hydrophobicity degree of such supports starts to affect more effectively the biocatalysts performance when other textural features of the supports become more significant, such as specific area and porosity.     

Microbial tropicalization driven by a strengthening western ocean boundary current

Western boundary currents (WBCs) redistribute heat and oligotrophic seawater from the tropics to temperate latitudes, with several displaying substantial climate change‐driven intensification over the last century. Strengthening WBCs have been implicated in the poleward range expansion of marine macroflora and fauna, however, the impacts on the structure and function of temperate microbial communities are largely unknown. Here we show that the major subtropical WBC of the South Pacific Ocean, the East Australian Current (EAC), transports microbial assemblages that maintain tropical and oligotrophic (k‐strategist) signatures, to seasonally displace more copiotrophic (r‐strategist) temperate microbial populations within temperate latitudes of the Tasman Sea. We identified specific characteristics of EAC microbial assemblages compared with non‐EAC assemblages, including strain transitions within the SAR11 clade, enrichment of Prochlorococcus, predicted smaller genome sizes and shifts in the importance of several functional genes, including those associated with cyanobacterial photosynthesis, secondary metabolism and fatty acid and lipid transport. At a temperate time‐series site in the Tasman Sea, we observed significant reductions in standing stocks of total carbon and chlorophyll a, and a shift towards smaller phytoplankton and carnivorous copepods, associated with the seasonal impact of the EAC microbial assemblage. In light of the substantial shifts in microbial assemblage structure and function associated with the EAC, we conclude that climate‐driven expansions of WBCs will expand the range of tropical oligotrophic microbes, and potentially profoundly impact the trophic status of temperate waters.     

First report of the potentially toxic marine diatom Pseudo‐nitzschia simulans (Bacillariophyceae) from the East Australian Current

Certain species of the marine diatom genus Pseudo‐nitzschia are responsible for the production of the domoic acid (DA), a neurotoxin that can bioaccumulate in the food chain and cause amnesic shellfish poisoning (ASP) in animals and humans. This study extends our knowledge by reporting on the first observation of the potentially toxic species Pseudo‐nitzschia simulans from this region. One clonal strain of P. simulans was isolated from the East Australian Current and characterized using light and transmission electron microscopy, and phylogenetic analyses based on regions of the internal transcribed spacer (ITS) and the D1–D3 region of the large subunit (LSU) of the nuclear‐encoded ribosomal deoxyribonucleic acid (rDNA), as well as examined for DA production as measured by liquid chromatography–mass spectrometry. Although this strain was non‐toxic under the defined growth conditions, the results unambiguously confirmed that this isolate is the potentially toxic species P. simulans – the first report of this species from the Southern Hemisphere.     

Colony aging affects the reproductive performance of Swiss Webster females used as recipients for embryo transfer

The objective was to evaluate the influence of colony aging in a Swiss Webster (SW) outbred stock used as recipients for embryo transfer. In the first study, a retrospective analysis was performed throughout several generations during a 38-month period in 2,398 embryos transferred to 108 SW recipients. A decrease in the percentage of live pups from transferred embryos was found at the end of the period. Impairment occurred due to the incidence of maternal cannibalism that increased from 0% to 67-100% (P<0.05), while pregnancy rate (pregnant/transferred recipients) and number of pups per delivered female were not affected throughout the period (P=NS). A following study was carried out to compare the reproductive performance of SW stock vs. B6D2F1 hybrid females in a 5-year interval. The study was conducted on a total of 893 embryos transferred to 40 females (20 SW and 20 B6D2F1) in Year #1, and 514 embryos transferred to 30 females (15 SW and 15 B6D2F1) in Year #5. No cases of maternal cannibalism were found on Year #1 in any of the strains (0/10 and 0/10). However, an incidence of 44,4% (4/9) was seen on Year #5 for SW, while for B6D2F1 the incidence was 0% (0/12) (P<0.05). Further examination of the uterus showed endometrial cysts and abnormal implantation sites in SW on Year #5 but not in B6D2F1 females. In conclusion, this study reports an impairment of the reproductive performance of an early aged SW outbred stock colony mainly due to the occurrence of maternal cannibalism. This finding has important implications for embryo transfer programs conducted in mouse facilities.     

Ex ante life cycle assessment of GaAs/Si nanowire–based tandem solar cells: a benchmark for industrialization

The International Journal of Life Cycle Assessment - The goal of this study is to perform an ex-ante life cycle assessment (LCA) of the emerging gallium-arsenide nanowire tandem solar cells on...